控制爆破法处理卡钻事故

介绍了在包头市某工程实施管道穿越黄河施工中,采用爆破法处理卡钻的经验。针对深水环境条件及钻杆内径小不宜采用集团装药的条件,确定采用"小直径爆破筒,钻杆内部装药"的爆破方案,阐述了爆破设计及施工注意事项。可供类似工程参考。     

Hydrogen-rich gas generation via the exhaust gas-fuel reformer for the marine LNG engine

Reformed exhaust gas recirculation technology has attracted great attention in internal combustion engines. A platform of an exhaust gas-fuel reformer connected with the marine LNG engine was set up for generating on-board hydrogen. Based on the platform, effects of the methane to oxygen ratio (M/O) and reformed exhaust gas ratio (R_EG) from the reformer and excess air ratio (λ) from the engine on the components, hydrogen yield, thermal efficiency and reforming process of the reformer were experimentally investigated. Results shown that hydrogen-rich gases (reformate) can be generated by reforming the mixture of engine exhaust gas (about 400 °C) and methane supplied via the reformer with Ni/Al₂O₃ catalyst, and the hydrogen concentration of reformate was between 6.2% and 12.6% by volume. The methane supplied rate and λ affected the components and temperature of the reactant in the reformer, while R_EG changed the gas hour space velocity during the exhaust gas-fuel reforming processes, resulting in the difference in the components of the reformate and thermal efficiency. At the present experimental condition, the highest H₂ concentration reformate was generated under the M/O of 2.0, λ of 1.55 and R_EG of 6%.     

Effect of catalytic washcoat shape and properties on mass transfer characteristics of microstructured steam-methanol reformers for hydrogen production

Many attempts have been made to improve mass transfer by reducing the size of reactors. However, such reduction will fairly quickly reach practical limitations and numerous difficulties still remain. Catalytic washcoat shape and properties may be critical design factors, but the mechanisms for their effects on mass transfer characteristics are still not fully understood. To effectively eliminate problems associated with mass transport phenomena in microstructured steam-methanol reformers, the effects of washcoat shape and properties were investigated in various situations by performing computational fluid dynamics simulations. The dependence of the solution on mass transfer characteristics was reduced to a small number of dimensionless parameters. A dimensionless mass transfer analysis was carried out in terms of the Sherwood, Schmidt, and pore Reynolds numbers. The results indicated that the rate of mass transfer is predominantly controlled by washcoat properties, and porosity and effective thermal conductivity are fundamentally important. The rate of the reforming reaction is typically controlled by kinetics at a temperature of 480 K and limited by mass transfer at a temperature of 580 K. The shape of washcoats affects the overall mass transfer characteristics, depending on the structural and thermal properties of washcoats. The shape effect is limited by heat transfer. A three-fold increase in effectiveness factor can be achieved by increasing the effective thermal conductivity of the washcoat. Design recommendations were finally made to improve transport characteristics for the systems.     

Dynamic simulation of hydrogen-based off-grid zero energy buildings with hydrogen storage considering Fanger model thermal comfort

In this study, some locations with different climates, off-grid zero energy buildings with hydrogen energy storage systems are designed, and transient analysis is conducted. These considered buildings supply their electricity consumption without using the electrical grid and PV panels or wind turbines. Also, they supply thermal comfort to occupants by using a vapor compression chiller and humidifier. Domestic hot water of occupants is supplied using solar collectors. For analyzing building's performance and objectives achievement, TRNSYS software is used. Also, for evaluating occupant thermal comfort, the Fanger model is used. The considered building is a one-story building with a 150 m² area. Four occupants are considered. Both of them are seated at rest, and another is seated with light working such as typing. Using the Fanger model equation and MATLAB software, the thermal comfort of occupants is determined. For domestic hot water consumption, verified profiles that vary during 24 h of the day are considered. Achieved results show that for humid and cold cities, PV panels with an area of 73 and 76 m² can be supplied the required electricity of considered building with four occupants and battery state of charge is higher than 50% and 10%, respectively. Moreover, with a suitable air conditioner system, the predicted percentage of dissatisfied (PPD) can be lower than 12% and 8% for humid and cold cities. Therefore, the building can be converted to a zero-energy building using its rooftop area.     

Use of La2O3 with 8YSZ as thermal barrier coating and its effect on thermal cycle behavior,microstructure, mechanical properties and performance of diesel engine operated by hydrogen-algae biodiesel blend

In this present work, the effect of lanthanum oxides (La₂O₃) on the thermal cycle behavior of TBC coatings and mechanical properties such as adhesion strength and microhardness of 8% Yttria Stabilized Zirconia (8YSZ) TBCs were investigated. CoNiCrAlY and aluminium alloy (Al–13%Si) were used as bond coat and substrate materials. 8YSZ and different wt % of La₂O₃ (10, 20, and 30%) top coatings were applied using the atmospheric plasma spray (APS) method. The thermal cycling test for TBC coated samples were conducted at 800 °C in the electric furnace. The XRD pattern shows that the La₂O₃ doped 8YSZ material transformed to cubic pyrochloric structured La₂Zr₂O₇ during thermal cycling. Further, the Taguchi-based grey relation analysis (GRA) method was applied to optimize the TBC coating parameters to achieve better mechanical properties such as adhesion strength and microhardness. And the optimized La₂O₃/8YSZ TBC coating was coated on CRDI engine combustion chamber components. The engine was tested with microalgae biodiesel and hydrogen, and the results were promising for the TBC-coated engine. The engine performance increased while using La₂O₃/8YSZ coated components, and the emissions from engine exhaust gas such as CO, HC, and smoke reduced considerably. It was found that there was no separation crack and spallation of the coating layer in the microstructure. Ultimately, the microstructural analysis of the optimized TBC coated piston sample after 50 h of running in the diesel engine confirmed that the developed coating had a superior thermal insulation effect and longer life.     

Double-layer fuzzy adaptive NMPC coordinated control method of energy management and trajectory tracking for hybrid electric fixed wing UAVs

The energy management and trajectory tracking control are crucial to realize long-endurance autonomous flight for hybrid electric UAVs. This study aims to comprehensively consider energy management and trajectory tracking for hybrid electric fixed wing UAVs with photovoltaic panel/fuel cell/battery. A double-layer fuzzy adaptive nonlinear model predictive control method (DFNMPC) is proposed. Separated by the surplus demand power, energy management and trajectory tracking problem are decoupled into the high-layer fuzzy adaptive nonlinear model predictive controll problem (H-FNMPC) and low-layer fuzzy adaptive nonlinear model predictive controll problem (L-FNMPC). H-FNMPC solves the trajectory tracking and navigation control probelm for the greatest benefit of solar energy. L-FNMPC solves the power allocation problem of hybrid energy system for minimum equivalent hydrogen consumption. A fuzzy adaptive prediction horizon adjustment method based on UAV maneuvering degree is proposed to effectively improve proposed method adaptability to different mission profiles. Analogously, a fuzzy adaptive equivalent hydrogen consumption factor adjustment method in L-FNMPC is proposed to ensure the flexible utilization of battery. In addition, an equivalent hydrogen flow rate calculation method based on the real-time current ratio is proposed for PV/FC/Battery hybrid energy system. Numerical simulation results including a spiral trajectory tracking and a quadrilateral trajectory tracking, demonstrate that DFNMPC can simultaneously handle energy management and trajectory tracking problem for hybrid electric UAVs. Compared to hierarchical fuzzy state machine strategy, DFNMPC can save 13.3% hydrogen for the spiral trajectory tracking, and 56.9% for the quadrilateral trajectory tracking. It indicates that the energy efficiency can be improved from both levels of energy management and flight motion. The proposed method prospected for exploring high-energy-efficiency autonomous flight of hybrid electric UAVs in the future.     

Flow field simulation and pressure drop modeling by a porous medium in PEM fuel cells

For proton-exchange membrane fuel cells, the distribution of reactant flow in the stack is critical to the fuel cell's efficiency. The uneven distribution of reactant flow in the stack may cause poor current density, low performance, and material degradation. To understand and accurately predict the flow field in the proton-exchange membrane fuel cell system, the present study aims to develop a simple correlation to analyze the pressure drop in fuel cell stacks. The flow channel in each cell of a stack is treated as a porous medium, and a power-law model is used to approximate the porous medium momentum source term. For the stacks with fewer cell numbers, namely, 1, 5, and 10 cells, the parameters in the power law are established based on the experimental data. Then, a correlation is developed to simulate the flow and predict the pressure drop in the stack with higher cell numbers (ie, 20 and 40 cells). The simulations show that the pressure drop in each cell of a stack is almost invariable, and the average pressure drop decreases with increasing the number of cells. The flow uniformity in the stacks with different cell numbers is evaluated using the dimensionless pressure drop and the pressure drop ratios. It suggests that the lower the cell number, the more uniform the pressure drop. The developed model is conducive to efficiently designing the flow channel for a fuel cell stack with large cell numbers.     

双联斜齿轮斜齿脱模机构及改进型三板模设计

依据双联斜齿轮和单斜齿轮2个塑件同模注塑的需要,以双联斜齿轮塑件的模腔设计为中心,设计了一副一模两腔点浇口多板模注塑模具。模具中,双联齿轮的上、下斜齿轮斜齿分别使用2个可旋转斜齿轮成型件进行成型;单斜齿轮使用1个可旋转斜齿轮成型件进行成型。3个斜齿成型件设置成转动型成型件,依靠塑件的移动以驱动斜齿成型件转动,达到塑件斜齿脱模的目的;塑件的脱模移动有两种动力来源,一种是模具模板的打开驱动,一种是使用推管顶出驱动。模具为一种改进型三板模结构,定模侧增加了流道板,动模侧增加了垫板,从而可以实现模具的4次开模;4次开模动作中,2次用于流道废料的脱模,1次用于流道镶件的先抽芯驱动,1次用于模腔的打开和双联斜齿轮上斜齿轮的旋转脱模驱动。     

Process knowledge-based random forest regression for model predictive control on a nonlinear production process with multiple working conditions

In process industry, predictive control approaches have been widely used for nonlinear production processes. Practically, the predictor in a predictive controller is extremely important since it provides future states for the optimization problem of controllers. The conventional predictive controller with precise mathematical predictors approximating the state space of physical systems is difficult and time-consuming for nonlinear production processes, and it performs poorly over a wide range of working conditions and with significant disturbances. To address the challenges, the trend of applying artificial intelligence emerges. However, the industrial process-specific knowledge is ignored in most cases. In this study, a predictive controller with a control process knowledge-based random forest (RF) model is proposed. Specifically, working data are clustered at first to handle diverse working conditions. Then, a process knowledge-based forest predictor, namely MIW-RF model with a redesigned cascading RF structure, is proposed to incorporate control process knowledge into modeling. Thus, future states of controlled variables could be more accurately acquired for the optimizer. A simplified version of the predictive model is also developed with quick model training and updating. The proposed predictive methods are finally introduced into the controller design. According to the empirical results, the proposed methods deliver a better control performance against benchmarks, including more accurate anticipated controlled-variable responses, better set-point tracking and disturbance rejection capability.     

大豆蛋白纳米纤维对铁纳米颗粒的稳态化作用

为明确大豆蛋白纳米纤维的结构形成和扩宽铁强化剂的食品工业应用，以大豆分离蛋白（soy protein isolate，SPI）为原料，通过5 h的酸热处理制备纳米纤维（soy protein isolate fibrils，Fib SPI），系统研究纤维形成前后蛋白结构的变化，并进一步制备铁纳米颗粒（iron nanoparticles，Fe NPs），探究Fib SPI对铁的稳态化作用。研究结果表明：在酸热处理过程中，SPI产生大量的β-折叠结构，其与硫磺素T结合，显示出增强的荧光强度；此外，7S组分先发生降解，利于纤维成核形成，随后11S逐渐被水解，促进纤维生长；同时水解产生大量的小肽组分，提高了产物的还原力。研究进一步利用Fib SPI递送铁纳米颗粒（Fe NPs），发现与原始SPI相比，铁纳米颗粒可在Fib SPI原位形成胶体稳定的铁-大豆蛋白纳米纤维复合物（Fe FibSPI），并以Fe（II）形式存在，其对乳液体系色泽及稳定性的影响较硫酸亚铁或氯化铁小。该研究可为构建新型植物基铁强化剂递送体系提供理论和方法指导。